A custom logo embosser turns your brand mark into a raised seal. It looks excellent when the artwork suits the process, and disappointing when it does not. The good news is that the fix is almost always simple: prepare the logo properly before you send it. This guide shows how.
Remember what an embosser does. It presses paper between two metal plates, so your design is shaped in relief rather than printed. Colour does not exist here. Only shape, line and space matter.
Which file to send
Send the cleanest version of your logo you have. In order of preference:
- A vector file. SVG, PDF or AI. These stay sharp at any size.
- A large PNG with a plain background. Several thousand pixels wide is ideal.
- A clear photo or screenshot. Workable, but we may need to redraw the logo, and we will show you the result in the proof.
Avoid small images saved from a website or social page. They are blurry at the edges, and a blurry edge becomes a soft, uneven plate.
Make it one colour
Convert the logo to a single colour, black on white. Gradients, shadows and tints cannot be pressed. If your logo uses two colours to separate shapes, check that the shapes still read when everything turns black. If they merge, the logo needs a thin gap between them.
Simplify the details
Embossing rewards bold, simple shapes. Here is what to look for and what to do about it.
| Problem in the logo | What happens in relief | Fix |
|---|---|---|
| Hairline strokes | Press softly or vanish | Thicken the lines |
| Tiny text or a tagline | Fills in and becomes unreadable | Drop it or set it larger |
| Gradients and shadows | Flatten into a solid blob | Use a flat one colour version |
| Very close shapes | Merge into one raised area | Open up the gaps |
| Full background box | Presses as a heavy solid block | Remove it, or keep only an outline |
Most logos survive this treatment and look cleaner for it. A simplified mark is often more elegant as a seal than the full colour version.
Choose the right size
Detail needs room. The 40 mm plate suits a monogram, a simple icon or a short name. The 50 mm plate gives a logo with a symbol and text the space it needs. When in doubt, go larger. The article on 40 mm versus 50 mm designs shows the difference clearly.
Plan the text
If your seal has text curved around a symbol, keep it short: a name and one line is enough. Long text forces smaller letters, and small letters lose shape in relief. For a seal with a shop name, an address belongs on the stationery, not the plate.
Round seal or free shape?
Most embossers are round, which frames a logo neatly and suits formal use. Some logos work better as a free shape pressed alone. Tell us which you prefer, and look at the proof to see how the mark sits.
What happens after you send it
- We check the artwork against the rules above and clean it up where needed.
- You receive a design proof showing the final seal.
- You approve it, or ask for changes. Nothing is made until you approve.
- Production and dispatch follow, usually same day to 2 to 3 days after approval.
Use the proof. It is the cheapest place to catch a problem.
Before and after: what a good simplification looks like
Take a typical small business logo: a leaf icon, a shop name in a thin script, a tagline underneath and a soft green gradient behind it all. For a custom embosser, that logo works best as the leaf icon alone, redrawn with slightly thicker outlines, with the shop name set around the edge in a plain, bold typeface. The tagline and the gradient are dropped. Nothing about the brand is lost, because the shape of the leaf and the name carry the identity.
Do the same test on your own logo. Cover everything except the shape that people recognise, and ask whether it still says your name. If it does, that shape is your seal.
How to order your embosser
- Open the Impressa custom identity embosser. It takes your own name, text or logo. The 40 mm size is ₹1,669 and the 50 mm size is ₹2,999.
- Type your text, or switch on the image option and upload your logo. You can also build a live raised preview in the embosser designer.
- Approve the design proof we send. Dispatch is usually same day to 2 to 3 days after approval.
Browse every ready design in the personalised paper embossers collection.
Common questions
Can I send my logo as a JPG?
Yes, if it is large and sharp. A vector file is better, but a clean JPG or PNG works.
What if my logo has many colours?
We press a one colour version. Send the colour file and tell us which shapes matter most.
How thin can a line be?
Bold lines press best. Very fine lines press softly, so we thicken them in the proof where we can.
Can I add my brand name around the logo?
Yes, as curved text. Keep it short for the cleanest result.
Will the embosser leave colour on the paper?
No. It is a dry, raised impression. For colour, add a custom logo rubber stamp to the same packaging. See how it fits into small business branding.


